Distributors

Border States Supply Chain Update — November 2026

Border States Supply Chain Update — November 2026

FARGO, N.D., November 16, 2026 — Border States has published the following supply chain update.

Lead Time Trends

 

The United States modifies Section 338 tariffs on some Canadian goods

Effective October 30, the United States removed some Canadian products from the 50% Section 338 tariffs, including plywood, paper, machinery and refrigeration equipment, and added certain valves, carpets, waste products and other goods. Covered products remain subject to the tariffs regardless of their United States-Mexico-Canada Agreement status and may also face Section 232 duties.

Additionally, the Office of the U.S. Trade Representative (USTR) extended 178 current exclusions from China’s Section 301 tariffs through Saturday, January 9, 2027. The USTR also continued suspending maritime service fees and related duties on certain Chinese cargo-handling equipment through the same date.

The big picture: Customer tariff exposure still depends mainly on the product, country of origin, classification, material content and available documentation.

 

Labor market strengthens, but skilled workers remain in short supply

The U.S. labor market strengthened in October, but job gains were uneven across industries. Hiring rose in manufacturing and transportation sectors, while construction employment was nearly unchanged.

Zoom in:

  • The United States added 165,000 jobs in October, exceeding expectations of 59,000 jobs.
  • Gains for August and September were revised upward by a combined 84,000 jobs.
  • The unemployment rate edged down to 4.1% from 4.2% in September and stayed within a 4.1% to 4.3% range since March.
  • Labor force participation increased to 61.9% from 61.8% in September.
  • Average hourly earnings rose 3.1% compared with the prior year.
  • Sector trends showed manufacturing added 19,000 jobs, transportation and warehousing added 25,000 and construction shed 3,000 jobs, though nonresidential specialty trades added 7,900 jobs.

Why it matters: While October was a clear improvement from September, a stronger national report does not mean skilled labor is easier to find. Specialized workers may still be hard to secure, which can affect contractor availability, project schedules and labor costs. Interest rates remain high enough to keep borrowing, project financing and inventory costs elevated. Customers should keep reviewing financing assumptions and project budgets.

On the inflation side: The Federal Reserve (Fed) voted 10–2 to maintain the federal funds target range between 3.75%–4%. The Consumer Price Index (CPI) in October rose 0.4%, after a 0.6% jump in September, putting pressure on the Fed to stabilize inflation. The annual change in CPI for October was not published because the Bureau of Labor Statistics did not have October 2025 data available due to the government shutdown. The Producer Price Index (PPI) rose to 6.5% year over year in October, the most since November 2022. On a month-over-month basis, PPI rose 0.3% in October, easing from September’s sharp increase and below market expectations.

The bottom line: Labor conditions are expected to stay stable but selective through year-end and into early 2027. Experts expect the Fed to raise rates at their next meeting Tuesday, December 8, and Wednesday, December 9.

 

U.S.-bound freight enters a softer but still volatile winter market

Ocean freight moved sideways in October, as the dip during China’s Golden Week early in the month was largely recovered before demand began to fade in the final week. The U.S.-China tariff truce remains in place through early January 2027, opening a post-peak restocking window.

Zoom in: Drewry World Container Index fell $4,351/FEU (40-foot equivalent unit) on October 8 as factory closures in China cut export volumes. It then recovered through mid-month before finishing October at $4,429/FEU, down just 0.1% from September.

By the numbers:

  • By the end of October, Shanghai-to-New York rates fell 7.6% and Shanghai-to-Los Angeles rates fell 4.1%.
  • Factory closures in early October drove 11 transpacific blank sailings in a single week before capacity returned.
  • Suez Canal transits rose to 62 vessels in late October, the highest weekly level this year, adding capacity on Asia-to-Europe trade lanes.

What this means: October marked the transition of U.S.-bound freight from peak season to a softer winter market. Transpacific rates are expected to drift lower in the near term as demand fades and more capacity returns. However, rates remain more than double year-ago levels, and the Strait of Hormuz, the early-January tariff deadline and continued Asian port disruptions could renew volatility heading into Chinese New Year in February.

 

Railways see record intermodal volumes as trucking market holds steady

The trucking market held near its elevated plateau in October, with rates largely unchanged from September even as freight volumes softened.

Meanwhile, high diesel costs and tight truck capacity are helping push freight to rail. U.S. intermodal volumes rose 9.6% year over year, setting an all-time monthly record in October, the third straight month of record volumes. The American Association of Railroads noted that breadth of the gains points to underlying industrial strength, not just a shift from truck to rail.

The monthly averages for October from DAT:

  • Dry van spot rates rose 1.0% month over month, and contract rates rose 1.5%.
  • Flatbed spot rates fell 0.3% month over month and contract rates fell 0.2%.
  • Load-to-truck ratios eased modestly after September’s tightening. The van ratio fell 9.7% to 10.2, and the flatbed ratio slipped 3.8% to 37.5. Both remain sharply elevated, at 66.4% and 51.9% above year-ago levels.

Why it matters: Trucking capacity remains tight despite a drop in overall shipping demand. National tender volumes — which are the number of load requests shippers send to their contracted carriers — fell roughly 6% from mid-September. Yet, carriers still rejected more than 13% of contracted loads, a clear sign that lower demand has not translated into easier capacity.

 

Elevated commodity costs keep early planning in focus

Commodity prices remained high but uneven heading into November.

Across the categories:

  • Copper prices have eased from September’s record highs but are still well above last year’s levels.
  • Aluminum supply is improving as higher Chinese output offsets Middle East supply disruptions.
  • Steel and PVC suppliers began November with price increases, while strong demand from large data center and infrastructure projects continues to strain production capacity and lead times.
  • Lumber remains relatively stable compared with copper, steel and PVC. Softer housing and residential construction demand is helping limit price pressure, while mill production cuts and Canadian trade costs support prices.
  • Crude oil prices remain volatile due to Middle East supply risks, inventories and global production. Fuel surcharges, freight costs and petroleum-based resin inputs can stay high even when crude prices fall.

What we’re watching: How data center construction, utility investments, tariffs and global disruptions affect manufacturing capacity and total delivered costs.

Looking ahead: When preparing for year-end work and 2027 projects identify critical materials early, confirm lead times before finalizing project schedules, review quote-validity periods closely and keep approved alternates available where possible.

Bonus: Read our 2026 State of Commodities report for a high-level overview of the top factors impacting commodities and what to watch for in 2027.

 


 

Tagged with , , ,

Comment on the story

Your email address will not be published. Required fields are marked *